Dialogic:
CCG telecom is an authorized reseller of Quintum products.
CCG carries a full line of Quintum products.
If you do not see the item you are looking for please call 401-596-3100 or
e-mail sales@ccgtelecom.com
If you do not see the item you are looking for please call 401-596-3100 or
e-mail sales@ccgtelecom.com
e-mail sales@ccgtelecom.com
| SKU Description | |
| 501-0134-00 | Tenor ASG200 2 Port VoIP Station Gateway |
| 501-0135-00 | Tenor ASG400 4 Port VoIP Station Gateway |
| 501-0134-SG | Tenor-S ASG200 2 Port VoIP Station Gateway |
| 501-0135-SG | Tenor-S ASG400 4 Port VoIP Station Gateway |
| 501-0132-00 | Tenor ASM200 2 Port VoIP MultiPath Switch |
| 501-0133-00 | Tenor ASM400 4 Port VoIP MultiPath Switch |
| 501-0132-SG | Tenor-S ASM200 2 Port VoIP MultiPath Switch |
| 501-0133-SG | Tenor-S ASM400 4 Port VoIP MultiPath Switch |
| 501-0105-00 | AS Series Country Kit for use in US and Canada Power supply kit for Tenor AS Series Switches |
| 501-0106-00 | AS Series Country Kit for use in Continental Europe Power supply kit for Tenor AS Series Switches |
| 501-0107-00 | AS Series Country Kit for use in ChinaPower supply kit for Tenor AS Series Switches |
| 501-0108-00 | AS Series Country Kit for use in India/South Africa Power supply kit for Tenor AS Series Switches |
| 501-0109-00 | AS Series Country Kit for use in U.K. and IrelandPower supply kit for Tenor AS Series Switches |
| 501-0110-00 | AS Series Country Kit for use in Australia |
| Power supply kit for Tenor AS Series Switches | |
| 501-0156-00 | AS Series Universal Powered Supply(100-240 Volts Ac) |
| Universal power supply kit for Tenor AS Series Switches. | |
| For use in countries where Quintum does not offer a specific | |
| country kit. The appropriate AX/DX Country Kit(power cord) | |
| found on page 32 must also be specified | |
| 505-0072-00 | PS-2AS PacketSaver Option for 2 Port AS Series Analog Tenors |
| 505-0064-00 | PS-4AS PacketSaver Option for 4 Port AS Series Analog Tenors |
| 505-0065-00 | GK-20AS GateKeeper 20 Port Upgrade for Analog Tenors |
| Provides an additional twenty VoIP port capacity when using the | |
| integrated gatekeeper for Tenor MultiPath switches. Only ONE upgrade | |
| can be supported on the Tenor AS | |
| 505-0067-00 | IVR-6AS IVR Language option for AS Series Tenor |
| Additional language option for Tenor AS Series multilingual IVR feature | |
| One Language option is supplied as standard with each Tenor AS Series | |
| Multipath switch. Up to 2 additional IVR Language Options can be added | |
| to the analog Tenors. | |
| 501-1198-00 | Tenor AFG200 2 Port VoIP Station Gateway |
| 501-1201-00 | Tenor AFG400 4 Port VoIP Station Gateway |
| 501-1194-00 | Tenor AFG800 8 Port VoIP Station Gateway |
| 501-1198-SG | Tenor-S AFG200 2 Port VoIP Station Gateway |
| 501-1201-SG | Tenor-S AFG400 4 Port VoIP Station Gateway |
| 501-1194-SG | Tenor-S AFG800 8 Port VoIP Station Gateway |
| 501-1199-00 | Tenor AFT200 2 Port VoIP Trunking Gateway |
| 501-1202-00 | Tenor AFT400 4 Port VoIP Trunking Gateway |
| 501-1195-00 | Tenor AFT800 8 Port VoIP Trunking Gateway |
| 501-1199-SG | Tenor-S AFT200 2 Port VoIP Trunking Gateway |
| 501-1202-SG | Tenor-S AFT400 4 Port VoIP Trunking Gateway |
| 501-1195-SG | Tenor-S AFT800 8 Port VoIP Trunking Gateway |
| 501-1203-00 | Tenor AFE400 4 Port VoIP Enterprise Gateway |
| 501-1205-00 | Tenor AFE600 6 Port VoIP Enterprise Gateway |
| 501-1203-SG | Tenor-S AFE400 4 Port VoIP Enterprise Gateway |
| 501-1205-SG | Tenor-S AFE600 6 Port VoIP Enterprise Gateway |
| 501-1200-00 | Tenor AFM200 2 Port VoIP MultiPath Switch |
| 501-1204-00 | Tenor AFM400 4 Port VoIP MultiPath Switch |
| 501-1200-SG | Tenor-S AFM200 2 Port VoIP MultiPath Switch |
| 501-1204-SG | Tenor-S AFM400 4 Port VoIP MultiPath Switch |
| 520-1033-00 | AF Series Universal Power Supply (100-240 Volts ac) |
| Universal power supply kit for Tenor AF Series Switches. | |
| The appropriate Country Kit(power cable) for the country of installation | |
| must also be specified | |
| 501-1186-00 | AF Series Country Kit for use in China |
| Power supply cable for Tenor AF Series Switches | |
| 501-1187-00 | AF Series Country Kit For use in Continental Europe |
| Power supply cable for Tenor AF Series Switches | |
| 501-1188-00 | AF Series Country Kit for use in Australia/NZ |
| Power supply cable for Tenor AF Series Switches | |
| 501-1189-00 | AF Series Country Kit for use in Japan |
| Power supply cable for Tenor AF Series Switches | |
| 501-1190-00 | AF Series Country Kit for use in U.S.A |
| Power supply cable for Tenor AF Series Switches | |
| 501-1190-00 | AF Series Country Kit for use in Canada |
| Power supply cable for Tenor AF Series Switches | |
| 501-1192-00 | AF Series Country Kit for use in UK/Ireland |
| Power supply cable for Tenor AF Series Switches | |
| 501-1193-00 | AF Series Country Kit for use in India/South Africa |
| Power supply cable for Tenor AF Series Switches | |
| 501-1190-00 | AF Series Country Kit for use in Mexico |
| Power supply cable for Tenor AF Series Switches | |
| 501-1190-00 | AF Series Country Kit for use in Taiwan |
| Power supply cable for Tenor AF Series Switches | |
| 501-1190-00 | AF Series Country Kit for use in Korea |
| Power supply cable for Tenor AF Series Switches | |
| 501-1192-00 | AF Series Country Kit for use in Hong Kong |
| Power supply cable for Tenor AF Series Switches | |
| 520-1033-00 | AF Series Universal Power Supply (100-240 Volts ac) |
| Universal power supply kit for Tenor AF Series Switches. | |
| The Appropriate Country Kit(power cord) found on page 25 MUST also be | |
| specified. | |
| 505-0157-00 | PS-2AF PacketSaver Option for 2 Port AF Series Analog Tenors |
| 505-0158-00 | PS-4AF PacketSaver Option for 4 Port AF Series Analog Tenors |
| 505-0159-00 | PS-6AF PacketSaver Option for 6 Port AF Series Analog Tenor |
| 505-0116-00 | PS-8AF PacketSaver Option for 8 Port AF Series Analog Tenor |
| 505-0117-00 | GK-20AF GateKeeper 20 Port Upgrade Option for AF Series |
| Provides an additional twenty VoIP port capacity when using the | |
| integrated gatekeeper for Tenor MultiPath switches. Only ONE upgrade | |
| can be supported on the Tenor AF. | |
| 505-0118-00 | IVR-6AF IVR Language option for AF Series Tenor |
| Additional language option for Tenor AF Series multilingual IVR feature | |
| One Language option is supplied as standard with each Tenor AF Series | |
| Multipath switch. Up to 2 additional IVR Language Options can be added | |
| to the AF Series Tenors | |
| 501-1143-00 | Tenor AXG800 8 Port VoIP Station Gateway |
| 501-1144-00 | Tenor AXG1600 16 Port VoIP Station Gateway |
| 501-1145-00 | Tenor AXG2400 24 Port VoIP Station Gateway |
| 501-1143-SG | Tenor-S AXG800 8 Port VoIP Station Gateway |
| 501-1144-SG | Tenor-S AXG1600 16 Port VoIP Station Gateway |
| 501-1145-SG | Tenor-S AXG2400 24 Port VoIP Station Gateway |
| 501-1146-00 | Tenor AXT800 8 Port VoIP Trunking Gateway |
| 501-1147-00 | Tenor AXT1600 16 Port VoIP Trunking Gateway |
| 501-1148-00 | Tenor AXT2400 24 Port VoIP Trunking Gateway |
| 501-1185-00 | Tenor AXT4800 48 Port VoIP Trunking Gateway |
| 501-1146-SG | Tenor-S AXT800 8 Port VoIP Trunking Gateway |
| 501-1147-SG | Tenor-S AXT1600 16 Port VoIP Trunking Gateway |
| 501-1148-SG | Tenor-S AXT2400 24 Port VoIP Trunking Gateway |
| 501-1185-SG | Tenor-S AXT4800 48 Port VoIP Trunking Gateway |
| 501-1140-00 | Tenor AXE800 8 Port VoIP Enterprise Gateway |
| 501-1141-00 | Tenor AXE1600 16 Port VoIP Enterprise Gateway |
| 501-1142-00 | Tenor AXE2400 24 Port Voip Enterprise Gateway |
| 501-1140-SG | Tenor-S AXE800 8 Port VoIP Enterprise Gateway |
| 501-1141-SG | Tenor-S AXE1600 16 Port VoIP Enterprise Gateway |
| 501-1142-SG | Tenor-S AXE2400 24 Port VoIP Enterprise Gateway |
| 501-1137-00 | Tenor AXM800 8 Port VoIP MultiPath Switch |
| 501-1138-00 | Tenor AXM1600 16 Port VoIP MultiPath Switch |
| 501-1139-00 | Tenor AXM2400 24 Port VoIP MultiPath Switch |
| 501-1137-SG | Tenor-S AXM800 8 Port VoIP MultiPath Switch |
| 501-1138-SG | Tenor-S AXM1600 16 Port VoIP MultiPath Switch |
| 501-1139-SG | Tenor-S AXM2400 24 Port VoIP MultiPath Switch |
| 505-0068-00 | PS-8AX PacketSaver Option for 8 Port AX Series Analog Tenor |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP packet header overhead Is shared between multiple | |
| conversations reducing the amount of bandwidth required to support a | |
| given number of VoIP calls. Supports up to eight simultaneous VoIP calls | |
| 505-0069-00 | PS-16 AX PacketSaver Option for 16 Port AX Series Analog Tenor |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP packet header overhead is shared between multiple | |
| conversations reducing the amount of bandwidth required to support a | |
| given number of VoIP calls. Supports up to sixteen simultaneous VoIP calls | |
| 505-0070-00 | PS-24AX PacketSaver Option for 24 Port AX Series Analog Tenor |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP packet header overhead Is shared between multiple | |
| conversations reducing the amount of bandwidth required to support a | |
| given number of VoIP Calls. Supports up to twenty four simultaneous VoIP calls | |
| 505-0113-00 | PS-48AX PacketSaver Option for 48 Port AX Series Analog Tenor |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP packet header overhead Is shared between multiple | |
| conversations reducing the amount of bandwidth required to support a | |
| given number of Voip calls. Supports up to forty eight simultaneous VoIP calls | |
| 505-0065-00 | GK-20 GateKeeper 20 Port Upgrade Option for Tenor AX |
| Provides an additional twenty VoIP port capacity when using the | |
| integrated gatekeeper for Tenor MultiPath switches. Upgrades can be combined | |
| on Tenor switches to support a maximum of four hundred VoIP ports and 1,400 | |
| DN/IP database entries | |
| 505-0066-00 | GK-120AX GateKeeper 120 Port Upgrade Option for Tenor AX |
| Provides an additional one hundred VoIP port capacity when using the | |
| integrated gatekeeper in Tenor MultiPath switches. Upgrades can be combined on | |
| Tenor switches to support a maximum of four hundred VoIP ports and 1,400 | |
| DN/IP database entries | |
| 505-0067-00 | IVR-6AX IVR Language Option for AX Series Tenor |
| Additional Language option for tenor A series multilingual IVR Feature. | |
| One language option is supplied as standard with each Tenor AX Series | |
| Multipath switch. Up to 2 additional IVR Language Options can be added | |
| to the analog Tenors. | |
| 501-1154-00 | Rack Mounting Brackets for AX, BX, DX, Call Relay 60, and GK |
| Pair of spare or replacement rack mounting brackets for use when mounting | |
| Tenor AX, Tenor BX, Tenor DX, Tenor Call Relay 60, or Tenor Gatekeeper | |
| products in a standard nineteen inch equipment rack. | |
| 501-1169-00 | 50 Pin Telco to 8 Port RJ11 Adaptor Unit for AX Series Tenor |
| This adaptor mounts directly to the 50 pin Telco FXS or FXO connectors | |
| on the rear of Tenor AX products. It breaks out the first eight FXS or FXO ports | |
| of the twenty four supported by the Telco connector to individual RJ11 ports | |
| for use with standard RJ11 telephone cables | |
| 501-1170-00 | Rack Mounting 24 Port RJ11 Patch Panel for AXG/AXT Series |
| This patch panel connects to the 50 pin Telco FXS or FXO connectors | |
| on the rear of Tenor AX products using one 50 Pin Telcom to 50 Pin Telco cable. | |
| It breaks out the multiple FXS or FXO ports supported by the Telco connector | |
| to individual RJ11 ports for use with standard RJ11 Telephone cables. | |
| Note- A 50 Pin Telco to 50 Pin Telco connecting cable is required and is NOT | |
| Included. This item MUST be ordered separately | |
| 501-1171-00 | Rack Mounting 48 Port RJ11 Patch Panel for AXT/AXE/AXM Series |
| This patch panel connects to the 50 pin Telco FXS or FXO connectors | |
| on the rear of Tenor AX products using two 50 Pin Telcom to 50 Pin Telco cables. | |
| It breaks out the multiple FXS or FXO ports supported by the Telco connector | |
| to individual RJ11 ports for use with standard RJ11 Telephone cables. | |
| note- Two 50 Pin Telco to 50 Pin Telco connecting cable is required and is NOT | |
| included. They MUST be ordered separately. | |
| 421-1056-00 | 50 Pin Telco Cable Option for AX Series Tenor (Open Ends) |
| Twenty five pair, shielded, connection cable for Tenor AX Series products for use | |
| in "Punch-down" applications. This cable is three metres long and is terminated | |
| with a 50 pin female Telco connector at one end and open ends at the other | |
| 421-1057-00 | 50 Pin Telco to 50 Pin Telco Cable Option for AX Series Tenor |
| Twenty five pair, shielded, interconnection cable for Tenor AX Series products. | |
| This cable is one metre long and is terminated with a 50 pin female Telco connector | |
| at each end. For use with 50 Pin Telco breakout blocks or rack mounting Patch Panels | |
| 505-0177-SG | Upgrades Tenor ASG200 to Tenor-S Specification |
| 505-0178-SG | Upgrades Tenor ASM200 to Tenor-S Specification |
| 505-0179-SG | Upgrades Tenor ASG400 to Tenor-S Specification |
| 505-0780-SG | Upgrades Tenor ASM400 to Tenor-S Specificaton |
| 505-0181-SG | Upgrades Tenor AFG200 to Tenor-S Specification |
| 505-0182-SG | Upgrades Tenor AFT200 to Tenor-S Specification |
| 505-0183-SG | Upgrades Tenor AFM200 to Tenor-S Specification |
| 505-0184-SG | Upgrades Tenor AFG400 to Tenor-S Specification |
| 505-0185-SG | Upgrades Tenor AFT400 to Tenor -S Specification |
| 505-0186-SG | Upgrades Tenor AFE400 to Tenor-S Specification |
| 505-0187-SG | Upgrades Tenor AFM400 to Tenor-S Specification |
| 505-0188-SG | Upgrades Tenor AFE600 to Tenor-S Specification |
| 505-0189-SG | Upgrades Tenor AFG800 to Tenor-S Specification |
| 505-0190-SG | Upgrades Tenor AFT800 to Tenor-S Specification |
| 505-0191-SG | Upgrades Tenor AXG800 to Tenor-S Specification |
| 505-0192-SG | Upgrades Tenor AXT800 to Tenor-S Specification |
| 505-0193-SG | Upgrades Tenor AXE800 to Tenor-S Specification |
| 505-0194-SG | Upgrades Tenor AXM800 to Tenor-S Specification |
| 505-0195-SG | Upgrades Tenor AXG1600 to Tenor-S Specification |
| 505-0196-SG | Upgrades Tenor AXT1600 to Tenor-S Specification |
| 505-0197-SG | Upgrades Tenor AXE1600 to Tenor-S Specification |
| 505-0198-SG | Upgrades Tenor AXM1600 to Tenor-S Specification |
| 505-0199-SG | Upgrades Tenor AXG2400 to Tenor-S Specification |
| 505-0200-SG | Upgrades Tenor AXT2400 to Tenor-S Specification |
| 505-0201-SG | Upgrades Tenor AXE2400 to Tenor-S Specification |
| 505-0202-SG | Upgrades Tenor AXM2400 to Tenor-S Specification |
| 505-0203-SG | Upgrades Tenor AXT4800 to Tenor-S Specification |
| 501-1176-00 | Country Kit forCMS960 for use in USA |
| Heavy current power cable for use with Tenor CMS960 ONLY for 100-115 volts operation | |
| 501-1005-00 | Country Kit for use in USA |
| Power cable for Tenor Products | |
| 501-1005-00 | Country Kit for use in Canada |
| Power cable for Tenor Products | |
| 501-1005-00 | Country Kit for use in Mexico |
| Power cable for Tenor Products | |
| 501-1005-00 | Country Kit for use in Taiwan |
| Power cable for Tenor Products | |
| 501-1005-06 | Country Kit for use in Korea |
| Power cable for Tenor Products | |
| 501-1005-14 | Country Kit for use in Hong Kong |
| Power cable for Tenor Products | |
| 501-1005-06 | Country Kit for use in Continental Europe |
| Power cable for Tenor Products | |
| 501-1005-07 | Country Kit for use in China |
| Power cable for Tenor Products | |
| 501-1005-08 | Country Kit for use in Italy |
| Power cable for Tenor Products | |
| 501-1005-09 | Country Kit for use in Japan |
| Power cable for Tenor Products | |
| 501-1005-10 | Country Kit for use in Switzerland |
| Power cable for Tenor Products | |
| 501-1005-06 | Country Kit for use in Brazil |
| Power cable for Tenor Products | |
| 501-1005-14 | Country Kit for use in UK/Ireland |
| Power cable for Tenor Products | |
| 501-1005-15 | Country Kit for use in Israel |
| Power cable for Tenor Products | |
| 501-1005-17 | Country Kit for use in Argentina/Uruguay |
| Power cable for Tenor Products | |
| 501-1005-19 | Country Kit for use in Australia/NZ |
| Power cable for Tenor Products | |
| 501-1157-00 | Tenor BX204 BRI VoIP Switch (S/W Upgradeable to BX408) |
| Four channel VoIP switch with two BRI S/T ports and one 10/100 Ethernet port. | |
| Includes the following features: VoIP Switch and MultiPath architecture, SelectNet QoS | |
| based autoswitching. Supports a network of up to four Tenor switches without a | |
| gatekeeper. Supports up to four simultaneous voice calls over the IP network | |
| 501-1150-00 | Tenor BX408 BRI VoIP Switch (Not S/W Upgradeable) |
| Eight channel VoIP switch with four BRI S/T ports and one 10/100 Ethernet port. | |
| Includes the following features: VoIP Switch and MultiPath architecture, SelectNet QoS | |
| based autoswitching. Supports a network of up to four Tenor switches without a | |
| gatekeeper. Supports up to eight simultaneous voice calls over the IP network | |
| 501-1159-00 | Tenor BX816 BRI VoIP Switch (Not S/W Upgradeable) |
| Sixteen channel VoIP switch with eight BRI S/T ports and one 10/100 Ethernet port. | |
| Includes the following features: VoIP Switch and MultiPath architecture, SelectNet QoS | |
| based autoswitching. Supports a network of up to four Tenor switches without a | |
| gatekeeper. Supports up to sixteen simultaneous voice calls over the IP network. | |
| 505-0094-00 | VC-4BX Four Channel Upgrade for Tenor BX204 Only |
| Four channel upgrade for existing Tenor BX204. Software upgrade activates two | |
| additional BRI ports and increases the simultaneous VoIP calling capacity by four | |
| channels, up to a maximum of eight simultaneous VoIP calls. Upgrades BX204 to | |
| BX408 | |
| 505-0095-00 | PS-4 BX PacketSaver Option for Tenor BX204 |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP Packet header overhead is shared between multiple conversations reducing the | |
| amount of bandwidth required to support a given number of VoIP calls. Supports up to | |
| Four simultaneous VoIP calls. | |
| 505-0096-00 | PS-8 BX PacketSaver Option for Tenor BX408 |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP Packet header overhead is shared between multiple conversations reducing the | |
| amount of bandwidth required to support a given number of VoIP calls. Supports up to | |
| eight simultaneous VoIP calls | |
| 505-0097-00 | PS-16 BX PacketSaver Option for Tenor BX816 |
| Reduces bandwidth required by multiplexing multiple voice samples into | |
| one VoIP packet for multiple calls between Tenor switches. In this way | |
| the IP Packet header overhead is shared between multiple conversations reducing the | |
| amount of bandwidth required to support a given number of VoIP calls. Supports up to | |
| sixteen simultaneous calls | |
| 505-0065-00 | GK-20BX GateKeeper 20 Port Upgrade Option |
| Provides additional twenty VoIP ports capacity when using the integrated gatekeeper | |
| for Tenor BX Series products. Upgrades can be combined on Tenor BX products to | |
| support a maximum of four hundred VoIP ports and 1,400 DN/IP database entries. | |
| 505-0066-00 | GK-120BX GateKeeper 120 Port Upgrade Option |
| Provides additional one hundred and twenty VoIP ports capacity when using the | |
| integrated gatekeeper in the Tenor BX Series products. Upgrades can be combined | |
| on Tenor BX products to support a maximum of four hundred VoIP ports and 1,400 | |
| DN/IP database entries | |
| 505-0059-00 | IVR-6BX IVR Language Option for Tenor BX Series Products |
| Additional language option for Tenor BX Series multilingual IVR feature. | |
| One language option is supplied as standard with each Tenor BX Series products. | |
| Up to 2 additional IVR Language Options can be added to the Tenor BX products. | |
| 501-1113-00 | Tenor DX2008 VoIP MultiPath Switch ( Not Software Upgradeable) |
| Eight channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet ports. | |
| Includes the following features: MultiPath architecture, SelectNet QoS based autoswitching. | |
| Supports a network of up to four Tenor switches without a gatekeeper Supports up to | |
| eight simultaneous voice calls over the IP network | |
| 501-1114-00 | Tenor DX2016 VoIP MultiPath Switch ( Software Upgradeable) |
| Sixteen channel VoIP switch with two T1/E!/PRI ports and one 10/100 Ethernet port. | |
| Includes the following features: MultiPath architecture, SelectNet QoS based autoswitching. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| sixteen simultaneous voice calls over the IP network | |
| 501-1115-00 | Tenor DX2024 VoIP MultiPath Switch ( Software Upgradeable) |
| Twenty four channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet port. | |
| Includes the following features: MultiPath architecture, SelectNet QoS based autoswitching. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| twenty four simultaneous voice calls over the IP network. | |
| 501-1116-00 | Tenor DX2030 VoIP MultiPath Switch ( Not Software Upgradeable) |
| Thirty channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet Port. | |
| Includes the following features: MultiPath architecture, SelectNet QoS based switching. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| thirty simultaneous voice calls over the IP network | |
| 501-1117-00 | Tenor DX4048 VoIP MultiPath Switch ( Not Software Upgradeable) |
| Forty eight channel VoIP switch with four T1/E1/PRI ports and one 10/100 Ethernet port. | |
| Includes the following features: MultiPath architecture, SelectNet QoS based autoswitching. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| forty eight simultaneous voice calls over the IP network. | |
| 501-1118-00 | Tenor DX4060 VoIP MultiPath Switch ( Not Software Upgradeable) |
| Sixty channel VoIP switch with four T1/E1/PRI ports and one 10/100 Ethernet port. | |
| Includes the following features: MultiPath architecture, SelectNet QoS based autoswitching. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| sixty simultaneous voice calls over the IP network. | |
| 501-1119-00 | Tenor DX6120 VoIP MultiPath Switch ( Not Software Upgradeable) |
| One hundred and twenty channel VoIP switch with six T1/E1/PRI ports and one 10/100 | |
| Ethernet port. Includes the following features: MultiPath architecture, SelectNet QoS | |
| based autoswitching. Supports a network of up to four Tenor switches without a | |
| gatekeeper. Supports up to one hundred and twenty simultaneous voice calls over the IP | |
| network. | |
| 501-1120-00 | Tenor DX8120 VoIP MultiPath Switch ( Not Software Upgradeable) |
| One hundred and twenty channel VoIP switch with eight T1/E1/PRI ports and one 10/100 | |
| Ethernet port. Includes the following features: MultiPath architecture, SelectNet QoS | |
| based autoswitching. Supports a network of up to four Tenor switches without a | |
| gatekeeper. Supports up to one hundred and twenty simultaneous voice calls over the IP | |
| 501-1121-00 | Tenor DX2048 VoIP Gateway ( Not Software Upgradeable) |
| Forty eight channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet port. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| forty eight simultaneous voice calls over the IP network. | |
| 501-1122-00 | Tenor DX2060 VoIP Gateway ( Not Software Upgradeable) |
| Sixty channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet port. | |
| Supports a network of up to four Tenor switches without a gatekeeper. Supports up to | |
| sixty simultaneous voice calls over the IP network. | |
| 501-1123-00 | Tenor DX4096 VoIP Gateway ( Software Upgradeable ) |
| Ninety six channel VoIP switch with four T1/E1/PRI ports and on e10/100 Ethernet port. | |
| Supports a network up to four Tenor switches without a gatekeeper. Supports up to | |
| Ninety six simultaneous voice calls over the IP network | |
| 501-1124-00 | Tenor DX4120 VoIP Gateway ( Not Software Upgradeable ) |
| One hundred and twenty channel VoIP switch with four T1/E1/PRI ports and one 10/100 | |
| Ethernet port. Supports a network of up to four Tenor switches without a gatekeeper. | |
| Supports up to one hundred and twenty simultaneous voice calls over the IP network. | |
| 505-0046-00 | VC-8DX Eight Channel Upgrade for Tenor DX2016 Only |
| Eight channel upgrade for existing Tenor DX Series product. Software upgrade increases | |
| the simultaneous VoIP calling capacity by eight channels. Upgrades DX2016 to DX2040 | |
| 505-0060-00 | VC-6DX Six Channel Upgrade for Tenor DX2040 Only |
| Six channel upgrade for existing Tenor DX Series product. Software upgrade increases | |
| the simultaneous VoIP calling capacity by six channels. Upgrades DX2024 to DX2030 | |
| 505-0061-00 | VC-24DX Twenty Four Channel Upgrade for Tenor DX4096 Only |
| Twenty four channel upgrade for existing Tenor DX Series Product. Software upgrade | |
| increases the simultaneous VoIP calling by capacity by twenty four channels, up to a | |
| maximum of one hundred and twenty calls. Upgrades DX4096 to DX4120 | |
| 505-0047-00 | PS-8DX PacketSaver Option for Tenor DX2008 |
| 505-0048-00 | PS-16DX PacketSaver Option for Tenor DX2016 |
| 505-0049-00 | PS-24DX PacketSaver Option for Tenor DX2024 |
| 505-0050-00 | PS-30DX PacketSaver Option for Tenor DX2030 |
| 505-0051-00 | PS-48DX PacketSaver Option for Tenor DX2048 to DX4048 |
| 505-0052-00 | PS-60DX PacketSaver Option for Tenor DX2060 to DX4060 |
| 505-0053-00 | PS-96DX PacketSaver Option for Tenor DX4096 |
| 505-0054-00 | PS-120DX PacketSaver Option for Tenor DX4120/DX6120/DX8120 |
| 505-0057-00 | GK-20DX GatewayKeeper20 Port Upgrade Option |
| Provides additional twenty VoIP ports capacity when using the integrated gatekeeper | |
| for Tenor DX Series products. Upgrades can be combined on Tenor DX products to | |
| support a maximum of four hundred VoIP ports and 1,400 DN/IP database entries. | |
| 505-0058-00 | GK-120DX Gatekeeper 120 port Upgrade Option |
| Provides additional one hundred and twenty VoIP ports capacity when using the | |
| integrated gatekeeper in Tenor DX series products. Upgrades can be combined on Tenor DX | |
| products to support a maximum of four hundred VoIP ports and 1,400 DN/IP database entries. | |
| 505-0059-00 | IVR-6 IVR Language Option for Tenor DX Series Products |
| Additional language option for Tenor DX Series multilingual IVR feature. | |
| One language option is supplied as standard with each Tenor DX Series product. Up to 2 | |
| additional IVR Language Options can be added to the Tenor DX products. | |
| 501-1154-00 | Rack Mounting Brackets for AX, BX, DX, Call Relay 60, and GK |
| Pair of spare or replacement rack mounting brackets for use when mounting | |
| Tenor AX, Tenor BX, Tenor DX, Tenor Call Relay 60, or Tenor Gatekeeper | |
| products in a standard nineteen inch equipment rack. | |
| 501-1087-00 | Tenor CMS 240 Carrier MultiPath Switch Base System ( a.c. power) |
| Tenor CMS 19" rack mounting 2 slot chassis with system controller, and single a.c power | |
| supply. The base system DOES NOT INCLUDE line interface cards, an H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be | |
| ordered separately. Power Requirements: 100-240 Volts a.c., 50/60 Hz | |
| 501-1088-00 | Tenor CMS 240 Carrier MultiPath Switch Base System ( d.c. power) |
| Tenor CMS 19" rack mounting 2 slot chassis with system controller, and single d.c power | |
| supply. The base system DOES NOT INCLUDE line interface cards, an H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be | |
| ordered separately. Power Requirements: -48 Volts d.c | |
| 501-1089-00 | Tenor CMS 960 Carrier MultiPath Switch Base System (a.c. power) |
| Tenor CMS 19" rack mounting 8 slot chassis with system controller, and dual redundant | |
| power supplies. The base system DOES NOT INCLUDE line interface cards, an H.323 | |
| gatekeeper, PacketSaver packet multiplexing, or multiple IVR languages. These options | |
| must be ordered separately. Power Requirements: 100-240 Volts a.c, 50/60 Hz | |
| 501-1090-00 | Tenor CMS 960 Carrier MultiPath Switch Base System (d.c. power) |
| Tenor CMS 19" rack mounting 8 slot chassis with system controller, and dual redundant | |
| power supplies. The base system DOES NOT INCLUDE line interface cards, an H.323 | |
| gatekeeper, PacketSaver packet multiplexing, or multiple IVR languages. These options | |
| must be ordered separately. Power Requirements: -48 Volts d.c | |
| 501-1091-00 | Optional Third a.c Power Supply Module for Tenor CMS 960 |
| Optional Third power supply module for Tenor CMS 960 8 slot chassis. Provides additional | |
| load sharing and fully redundant power back-up. Power Requirements: 100-240 Volts a.c | |
| 501-1092-00 | Optional Third d.c Power Supply Module for Tenor CMS 960 |
| Optional Third power supply module for Tenor CMS 960 8 slot chassis. Provides additional | |
| load sharing and fully redundant power back-up. Power Requirements: -48 Volts d.c | |
| 501-1082-00 | Tenor CMS DS-1 8 Port T1/E1 Line Interface Card |
| T1/E1 line interface card supports up to eight individually configurable T1/E1 lines via eight | |
| rear mounted RJ45 connectors. Up to four line cards can be combined to support up to 32 | |
| T1/E! lines for maximum of 768 or 960 calls respectively. Each line interface card can accept | |
| one or two DSO Resource plug-in modules, each of which will support up to 120 | |
| simultaneous VoIP calls for a maximum of 240 VoIP calls | |
| 501-1081-00 | Tenor CMS DSP-120 120 Port DSP Resource Module |
| DSP resource module supports up to 120 simultaneous VoIP calls per module. Up to two | |
| DSP modules can be combined to support up to 240 simultaneous VoIP calls per | |
| DS1 T1/E1 Line Interface Card. PLEASE NOTE: When using the Tenor CMS as a TDM | |
| circuit switch only, a minimum of one DSP Resource Module is mandatory when | |
| using T1 or E1 Channel Associated Signaling (CAS) protocols. | |
| 501-1075-00 | Tenor CMS System Controller Card-( Spare or Replacement) |
| Spare or replacement System Controller Card for Tenor CMS2400, Tenor CMS960, and | |
| Tenor Call Relay SP | |
| 501-1054-00 | Tenor CMS Blank Panel (Single)-(Spare or Replacement) |
| Single module spare or replacement blanking panel for use with Tenor CMS240, Tenor | |
| CMS960, and Tenor Call Relay SP | |
| 501-1055-00 | Tenor CMS Black Panel ( Triple)- ( Spare or Replacement) |
| Triple module spare or replacement blanking panel for use with Tenor CMS240, Tenor | |
| CMS960, and Tenor Call Relay SP | |
| 501-1093-00 | Tenor CMS 240 8/120 Bundled Systems (a.c. powered) |
| Consist of the Tenor CMS 240 Base System, a DS-1 Line interface Card, And one DSP | |
| Resource Module. This Bundled system DOES NOT INCLUDE and H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be | |
| ordered separate. Power Requirements: 100-240- Volts a.c., 50/60Hz | |
| 501-1094-00 | Tenor CMS 240 8/120 Bundled Systems (a.c. powered) |
| Consist of the Tenor CMS 240 Base System, a DS-1 Line interface Card, And one DSP | |
| Resource Module, and one PS-120 PacketSaver Option. | |
| This Bundled system DOES NOT INCLUDE and H.323 gatekeeper or multiple IVR | |
| languages. These options must be ordered seperately. | |
| Power Requirements: 100-240 Volts a.c, 50/60Hz | |
| 501-1099-00 | Tenor CMS 240 8/240 Bundled System (a.c. powered) |
| Consist of the Tenor CMS 240 Base System, a DS-1 Line interface Card, And two DSP | |
| Resource Modules. This bundled system DOES NOT INCLUDE an H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be ordered | |
| separately. Power Requirements: 100- 240 Volts a.c., 50/60 Hz | |
| 501-1100-00 | Tenor CMS 240 8/240 Bundled System (a.c. powered) |
| Consists of the Tenor CMS 240 Base System, a DS-1 Line Interface Card, two DSP | |
| Resource Modules, and two PS-120 PacketSaver Options. This bundled system | |
| DOES NOT INCLUDE an H.323 gatekeeper or multiple IVR languages. These options | |
| must be ordered separately. Power Requirements: 100-240 Volts a.c, 50/60 Hz | |
| 501-1101-00 | Tenor CMS 960 8/120 PS Bundled System (a.c. powered) |
| Consists of the Tenor CMS 960 Base System, a DS-1 Line Interface Card, and one DSP | |
| Resource Module. This Bundled system DOES NOT INCLUDE and H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be | |
| ordered separately. Power Requirements: 100-240 Volts a.c., 50/60 Hz | |
| 501-1102-00 | Tenor CMS 960 8/120 PS Bundled System (a.c. powered) |
| Consists of the Tenor CMS 960 Base System, a DS-1 Line Interface Card, and one DSP | |
| Resource Module, and one PS-120 PacketSaver Option. This bundled system | |
| DOES NOT INCLUDE an H.323 gatekeeper or multiple IVR languages. These options | |
| must be ordered separately. Power Requirements: 100-240 Volts a.c, 50/60 Hz | |
| 501-1097-00 | Tenor CMS 960 8/240 Bundled System ( a.c. powered) |
| Consist of the Tenor CMS 960 Base System, a DS-1 Line Interface Card, and two DSP | |
| Resource Modules. This bundled system DOES NOT INCLUDE an H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be | |
| ordered separately. Power Requirements: 100-240 Volts a.c., 50/60 Hz | |
| 501-1098-00 | Tenor CMS 960 8/240 PS Bundled System ( a.c powered) |
| Consists of the Tenor CMS 960 Base System, a DS-1 Line Interface Card, two DSP | |
| Resource Modules, and two PS-120 PacketSaver Options. This bundled system | |
| DOES NOT INCLUDE an H.323 gatekeeper or multiple IVR languages. These options | |
| must be ordered separately. Power Requirements: 100-240 Volts a.c, 50/60 Hz | |
| 501-1178-00 | Tenor CMS 960 16/480 Bundled System (a.c powered) |
| Consist of the Tenor CMS 960 Base System, two DS-1 Line Interface Card, and four DSP | |
| Resource Modules. This bundled system DOES NOT INCLUDE an H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be ordered | |
| separately. Power Requirements: 100- 240 Volts a.c., 50/60 Hz | |
| 501-1179-00 | Tenor CMS 960 16/480 Bundled System (a.c powered) |
| Consists of the Tenor CMS 960 Base Systems, two DS-1 Line Interface Cards, Four DSP | |
| Resource Modules, and four PS-120 PacketSaver Options. This bundle system | |
| DOES NOT INCLUDE an H.323 gatekeeper or multiple IVR languages. These options | |
| must be ordered separately. Power Requirements: 100-240 Volts a.c, 50/60 Hz | |
| 501-1180-00 | Tenor CMS 960 32/960 Bundled System (a.c. powered) |
| Consists of the Tenor CMS 960 Base System, four DS-1 Line Interface Cards, and eight | |
| DSP Resource Modules. This bundled system DOES NOT INCLUDE an H.323 gatekeeper, | |
| PacketSaver packet multiplexing, or multiple IVR languages. These options must be | |
| ordered separately. Power Requirements: 100-240 Volts a.c., 50/60Hz | |
| 501-1181-00 | Tenor CMS 960 32/960 Bundled System (a.c. powered) |
| Consists of the Tenor CMS 960 Base System, four DS-1 Line Interface Cards, eight | |
| DSP Resource Modules, and eight PS-120 PacketSaver Options. | |
| This Bundled system DOES NOT INCLUDE and H.323 gatekeeper or multiple IVR | |
| languages. These options must be ordered seperately. | |
| Power Requirements: 100-240 Volts a.c, 50/60Hz | |
| 505-0023-00 | GK-120 Gatekeeper Option ( Tenor CMS Only) |
| Integrated H.323 compliant Gatekeeper software supports up to 120 VoIP ports per option. | |
| Up to eight options can be combined on a Tenor CMS to support a maximum of 960 | |
| VoIP ports and 1,400 DN/IP database entries. | |
| 505-0022-00 | PS-120 PacketSaver Option (Tenor CMS Only) |
| PacketSaver packet multiplexing feature improves bandwidth utilization when making | |
| multiple calls between two Tenor switches. Each options supports up to 120 continuous | |
| VoIP calls. Up t eight options can be combined on a Tenor CMS to support a maximum of | |
| 960 simultaneous calls. | |
| 505-0030-00 | IVR-1 IVR Language Option |
| Additional language option for Tenor multilingual IVR feature. One language option is | |
| supplied as standard with each Tenor multipath Switch. Up to 2 additional IVR Language | |
| Options to the Tenor CMS | |
| 501-0184-00 | ApplicationServer Base Systems |
| Quintum ApplicationServer in 19" rack mounting chassis. This server is specifically designed | |
| to support and run Quintum VoIP network software applications. Various applications can be | |
| enabled, by adding the appropriate software licenses. Power Requirments 100-240 Volts | |
| a.c., 50/60 Hz | |
| 505-0142-00 | CRS2-S Call Rounting Server II Systme Software |
| Call Routing Server II system software to run on the ApplicationServer. | |
| Provides complex call routing management for Tenor based VoIP networks. The base | |
| system software can support call rates up to five calls per second (CPS). Call routing | |
| capacity can be increased by adding RS2-5 software upgrades. Call routing capacity | |
| upgrades may be combined to increase call routing capacity up to a maximum of 20 | |
| calls per second (72k BHCA) in one ApplicationServer. | |
| 505-0143-00 | RS2-5 Call Rounting Server II 5 CPS Upgrade |
| Increases the call routing capacity of the Call Routing Server II base system software by 5 | |
| calls per second(CPS). (Supports up to 25 or 20 E1 Spans with an average call duration of | |
| 2 minutes). Call routing capacity upgrades may be combined to increase call routing | |
| capacity up to a maximum of 20 calls per second in one ApplicationServer. | |
| 501-1172-00 | Tenor Call Relay 60 Base System |
| Tenor Call Relay 60 session border controller provides direct, secure, IP connections between | |
| different VoIP networks, insuring maximum voice quality and security. The base system | |
| supports up to 16 simultaneous VoIP calls between networks. Capacity may be expanded | |
| up to 60 simultaneous VoIP calls (2 E1 spans) by adding Call Capacity Upgrade Options. | |
| The Call Relay 60 DOES NOT INCLUDE PacketSaver. This is available as an optional | |
| software upgrade. Power Requirements: 100-240 Volts a.c., 50/60 Hz | |
| 505-0103-00 | CR-14 Call Relay Upgrade Option ( Call Relay 60 only) |
| Provieds additonal 14 call capacity for Call Relay 60 session border controller. Upgrades | |
| can be added to the base system to support a maximum of 60 simultaneous VoIP calls | |
| on a single Call Relay 60 base system. | |
| 505-0100-00 | CR-30 Call Relay Upgrade Option ( Call Relay 60 only) |
| Provides additonal 30 call capacity for Call Relay 60 session border controller. Upgrades | |
| can be added to the base system to support a maximum of 60 simultaneous VoIP calls | |
| on a single Call Relay 60 base system. | |
| 505-0104-00 | PS-14CR PacketSaver Option ( Call Relay 60 only) |
| PacketSaver packet multiplexing feature improves bandwidth utilization when making | |
| multiple calls between Quintum switches and Call Relays. This option supports up to 14 | |
| continuous VoIP calls. Options can be added a Call Relay 60 to support a maximum of | |
| 60 simultaneous calls. | |
| 505-0105-00 | PS-16CR PAcketSaver Option ( Call Relay 60 Only) |
| PacketSaver packet multiplexing feature improves bandwidth utilization when making | |
| multiple calls between Quintum switches and Call Relays. This option supports up to 16 | |
| continuous VoIP calls. Options can be added a Call Relay 60 to support a maximum of | |
| 60 simultaneous calls. | |
| 505-0101-00 | PS-30CR PacketSaver Option ( Call Relay 60 only) |
| PacketSaver packet multiplexing feature improves bandwidth utilization when making | |
| multiple calls between Quintum switches and Call Relays. This option supports up to 30 | |
| continuous VoIP calls. Options can be added a Call Relay 60 to support a maximum of | |
| 60 simultaneous calls. | |
| 505-0106-00 | GK-14CR60 Gatekeeper Option ( Call Relay 60 Only) |
| Gatekeeper option for use with the Call Relay 60 to provide gatekeeping and dynamic call | |
| routing fuctionality for IP end points within the local zone of the Call Relay. Calls to IP end | |
| points in the wide area network outside of the local zone are routed via the Call Relay to | |
| provide secure, anonymous connections. This option supports up to 14 continuous VoIP | |
| calls. Options can be combined on a Call Relay 60 to support a maximum of 60 | |
| simultaneous calls. | |
| 505-0107-00 | GK-16CR60 Gatekeeper Option ( Call Relay 60 Only) |
| Gatekeeper option for use with the Call Relay 60 to provide gatekeeping and dynamic call | |
| routing fuctionality for IP end points within the local zone of the Call Relay. Calls to IP end | |
| points in the wide area network outside of the local zone are routed via the Call Relay to | |
| provide secure, anonymous connections. This option supports up to 16 continuous VoIP | |
| calls. Options can be combined on a Call Relay 60 to support a maximum of 60 | |
| simultaneous calls. | |
| 505-0108-00 | GK-30CR60 Gatekeeper Option ( Call Relay 60 Only) |
| Gatekeeper option for use with the Call Relay 60 to provide gatekeeping and dynamic call | |
| routing fuctionality for IP end points within the local zone of the Call Relay. Calls to IP end | |
| points in the wide area network outside of the local zone are routed via the Call Relay to | |
| provide secure, anonymus connections. This option supports up to 30 continuous VoIP | |
| calls. Options can be combined on a Call Relay 60 to support a maximum of 60 | |
| simultaneous calls. | |
| 501-1095-00 | Tenor Call Relay SP Base Systems (a.c. power) |
| Tenor Call Relay SP Sessions Border Controller provides direct, secure, IP connections | |
| between different VoIP networks, insuring maximum voice quality and security. Supports | |
| up to 120 simultaneous VoIP calls between networks. (Equivalent to 5 T1 or 4 E1 spans.) | |
| Capacity may be expanded up to 672 simultaneous channels by adding multiple | |
| CR-72 or CR - 120 Upgrade Options Power Requirements: 100-240 Volts a.c., 50/60 Hz | |
| 501-1096-00 | Tenor Call Relay SP Base Systems (d.c. power) |
| Tenor Call Relay SP Sessions Border Controller provides direct, secure, IP connections | |
| between different VoIP networks, insuring maximum voice quality and security. Supports | |
| up to 120 simultaneous VoIP calls between networks. (Equivalent to 5 T1 or 4 E1 spans.) | |
| Capcity may be expanded up to 672 simultaneous channels by adding multiple | |
| CR-120 and CR- 72 Upgrade Options. Power Requirements:-48 Volts d.c | |
| 505-1038-00 | CR-120 Call Relay SP Upgrade Option ( Call Relay SP only) |
| Provides additional 120 call capacity for Call Relay SP sessions Border Controller. | |
| (Equal 5 T1/ 4 E1 spans.) This upgrade can be added to the base systems to support | |
| a maximum of 672 simultaneous VoIP on a single Call Relay Sp base systems | |
| 505-0022-00 | PS-120 PacketSaver Option (Call Relay SP Only) |
| PacketSaver packet multiplexing feature improves bandwidth utilization when making | |
| multiple calls between Quintum switches and Call Relays. Each option supports up to 120 | |
| continuous VoIP calls. PacketSaver options can be combined on a Call Relay SP to Support | |
| a Maximum of 672 simultaneous calls. | |
| 505-0110-00 | GK-120CRSP Gatekeeper Option (Call Relay SP Only) |
| Gatekeeper option for use with the Call Relay SP to provide gatekeeping and dynamic call | |
| routing fuctionality for IP end points within the local zone of the Call Relay. Calls to IP end | |
| points in the wide area network outside of the local zone are routed via the Call Relay to | |
| provide secure, anonymous connections. This option supports up to 120 continuous | |
| VoIP calls. Options can be combined on a Call Relay SP to support a maximum of 672 | |
| simultaneous calls. | |
| 501-1197-00 | Tenor GateKeeper+Base System |
| Stand-alone H.323 compliant gatekeeper for use with larger networks of Tenor switches | |
| and other H.323 compliant devices. BASE SYSTEM MUST BE PURCHASED WITH A | |
| MINIMUM OF EITHER A 20 PORT. OR A 100 PORT UPGRADE OPTION. The gatekeeper+ | |
| can be expanded to support up to 800 H.323 ports and 4000 DN/IP database entries by | |
| additional software upgrades. | |
| 505-0114-00 | GK-20 Tenor Gatekeeper+ 20 Port Upgrade Option |
| Provides twenty VoIP port capacity for Tenor Gatekeeper+. Upgrades can be combined | |
| on a Tenor Gatekeeper+ base system to support a maximum of eight hundred VoIP | |
| ports and 4000 DN/IP database entries. | |
| 505-0115-00 | GK-100 Tenor Gatekeeper+ 100 Port Upgrade Option |
| Provides one hundred port capcity for the Tenor Gatekeeper+. Upgrades can be combined | |
| on a Tenor Gatekeeper+ base system to support a maximum of eight hundred VoIP | |
| and 4000 DN/IP database entries | |
| 501-0184-00 | ApplicationServer Base Systems |
| Quintum ApplicationServer in 19" rack mounting chassis. This server is specifically designed | |
| to support and run Quintum VoIP network software applications. Various applications can be | |
| enabled, by adding the appropriate software licenses. Power Requirments 100-240 Volts | |
| a.c., 50/60 Hz | |
| 505-0139-00 | RM-100 RMSS License- 100 Tenor Registration Capacity |
| Remote Manage Session Server to allow registrations from up to 100 Tenors, with a | |
| maximum of 100 simultaneous management sessions. Capacity upgrades may be combined | |
| to increase capacity up to a maximum of 5000 Tenor registrations. |
e-mail sales@ccgtelecom.com
View Telecom Equipment:
Request A Quote: